Bradnams Diamond Series Pivot Screen Repair: Replacing Broken Head Blocks, Sill Blocks & Pivots

Pivot screens are a common sight on Queensland homes, letting you swing the screen open to reach the window without removing it. Over time, though, the small hardware that holds the screen in place can crack, wear or break, especially after years of sun and weather. When that happens the screen sags, won't pivot smoothly or won't stay in the frame.

The good news: you may not need a whole new screen. Replacing the hardware is often enough.

Signs your pivot screen hardware needs replacing

• The screen drops or sits crooked in the frame
• It won't pivot open, or swings too loosely
• Visible cracks, breaks or missing pieces at the top or bottom of the screen
• Hardware that's gone brittle, chalky or discoloured

What's in the FNQI-3D repair kit

The Bradnams Diamond Series Pivot Screen Repair Kit is a complete aftermarket replacement kit designed to suit Bradnams Diamond Series pivot screens. Each kit includes:

• 1 × head block
• 1 × sill block
• 2 × pivot components

It's available in white or black to match your window frames.

How to check it'll fit

1. Confirm your screen series. This kit is designed for Bradnams Diamond Series pivot screens.
2. Compare with your existing hardware. Compare your old blocks and pivots carefully against the product photos.
3. Pick your colour. White or black to match your frames.

Locally made replacement parts

FNQI-3D designs and manufactures these replacement components locally in Far North Queensland using 3D printing, giving you a practical way to replace cracked, worn or damaged hardware.

FAQ

Is this a genuine Bradnams part?
No. It's an aftermarket replacement made by FNQI-3D, not manufactured or supplied by Bradnams.

What's in one kit?
One head block, one sill block and two pivots. Check how many parts your screens need before ordering.

What colours are available?
White and black.